Repair for ice makers that make no ice, small or hollow cubes, jams, leaks or noisy dispensers in refrigerators and standalone units.
An ice maker seems like a small thing until it quits on the hottest week of the year. Under the hood it is a surprisingly complex part: a water valve, a fill tube, a heater, a mold, a motor and a control that has to time everything correctly in a cold space. Nashville homeowners call us when ice stops, cubes shrink to chips, the bin jams into a block or the dispenser leaks onto the floor. Most of these problems come down to water supply, freezing or a worn part.
We check the water pressure and supply line, inlet valve, filter, fill tube, mold heater, ejector motor, thermostat and control. We also test the freezer temperature, because an ice maker needs a cold, stable freezer to work. After the repair we run several full cycles so you can see ice drop before we leave, and we give you tips such as changing the filter on schedule to keep cubes clear and tasting fresh.
A closed water line, failed valve, frozen fill tube or bad module are the usual causes.
Low water pressure or a clogged filter shorts the fill, and we correct it.
A melted and refrozen bin of ice often signals a temperature or door seal problem.
Worn seals, a cracked tube or a loose line leak at the door or the bottom of the unit.
Water to cube to bin.
Common failure points.
When the mechanism fails.
Ice needs steady cold.
Proof before we leave.
Keep cubes clear and fresh.
Every topic has its own page with what to expect and how we approach it.
Topic guideRefrigerator Types ComparedTop freezer, bottom freezer, side by side and french door refrigerators compared on space, cost, features and repairs.Learn more 
Topic guideError Codes and Warning SignsWhat common error codes, noises, smells and symptoms mean and when to stop using an appliance and call…Learn more 
Top appliance brandScotsmanA commercial ice maker brand with cubers, flakers and nugget machines used in restaurants, bars, hotels and healthcare.Learn more Pick an appliance and tick what you see and hear to get likely causes, safety notes and the service page that fits.
You tell us the brand, the model and what the appliance is doing, and we give you early guidance and set a visit that fits your day.
A technician inspects the appliance, reads codes and tests parts with meters and gauges to find the real cause.
You get a plain written plan with the parts, the work and the cost, and honest advice on repair or replace.
We repair with parts matched to your model, or install the new appliance level, connected and secured.
We run the appliance through a full cycle, check for leaks and show you how it works before we leave.
We keep a record, answer questions and stay available if anything seems off after the visit.
A shut water line, a failed inlet valve, a frozen fill tube or a bad ice maker module are typical causes.
Low water pressure or a clogged filter reduces the fill.
About every six months, or as the maker recommends.
Old ice, an old filter or food odors in the freezer. Clean the bin and replace the filter.
Yes, including under-counter units. Commercial machines are covered on our commercial pages.
Refrigerator RepairDiagnosis and repair for refrigerators that run warm, run constantly, leak, frost up or make noise, on every…Explore 
Refrigerator Water Leak RepairFinds and fixes leaks from refrigerator water lines, inlet valves, filters, drain pans and clogged defrost drains before…Explore 
Ice Maker InstallationIce maker and water line installation for refrigerators and under-counter units: valves, lines, filters, drains and first-cycle testing.Explore 
French Door Refrigerator RepairRepair for french door refrigerators: bottom freezer drawers, dual evaporators, ice makers, water filters and smart features.Explore Tell us about your appliance and we will call you back to set up a visit.
Or call (615) 357-7797 to talk now.
